There is an incredible amount of technology in each of today’s tires especially when compared to the original solid rubber tires that were used on early vehicles. Belts of fiberglass, metal and other materials are weaved into the foundation of the tire. Then these and other structural elements are then basically pressure baked into a thick layer of rubber and synthetic materials. All this technology leads to a tire that can give you good traction in all weather conditions, a smooth ride, and last for thousands of miles if you just do a few basic items on a regular basis. We at Terry's North Coast Auto located in Cleveland are here to help you get the maximum life out of your tires by performing these basic services whenever you visit our shop.
Terry's North Coast Auto knows tires are expensive, so we help you get the most mileage and life for your money from the tires that we sell. During each visit your vehicle has with us we will visibly inspect, check and adjust tire pressures to the manufacture’s specifications. Maintaining correct tire pressure is one of the most basic requirements for maintaining your tires. Tire pressures will normally fluctuate with the seasons that we have in Cleveland.
The front tires on many vehicles do more “work” than the back tires due to steering, acceleration and braking. So, they wear more than the rear tires. Terry's North Coast Auto will recommend and rotate your tires as we see needed to spread the wear evenly over all four tires. Additionally, we use some of the best equipment to mount and balance your tires initially and will recommend and perform a four-wheel alignment as needed so to get maximum life out of your tire investment.